The following guide goes over how to register your Agrowtek Integration Hub to your account using the Growlink Mobile App and how to add new Agrowtek devices to your existing Agrowtek Integration Hub.
1) Plug in your Agrowek Integration Hub to power it on. The LED should be blinking blue. If not, hold the SETUP button until status light flashes blue rapidly (12-15 seconds).
2) Download the Growlink app from the Apple App Store, or Google Play Store:
3) Go to portal2.growlink.com/signup or tap the ‘Sign Up’ button at the login page of the Growlink Mobile App to create a Growlink Account: 
After creating your account, a verification email will be sent from ‘no-reply@growlink.com’ to the email address set for your newly created account. One must verify your email address in order to utilize your newly created account.
4) Open the Growlink Mobile App and login to your newly created and verified account:
5) Tap the icon of three lines in the top-left of the Mobile App, then tap the Hardware button in the following menu:
6) One can add a controller to an existing room, or tap the ‘+Add’ button in the following page to add a new room to your account. This is the container that will hold the future controller registration:
7) If you are creating a new Room, provide a name for the Room, the Square Footage of the Room, and the Room Type, followed by tapping the 'Create’ Button to finish creating that room:
8) Once an existing room has been selected or a new room has been created, tap the ‘Continue’ button to begin registering the controller to your account:
9) Tap the ‘Integrations’ button in the following page:
10) Select the Agrowtek Integration Hub in the following menu:
11) Select the ‘Get Started’ button underneath the ‘Set up a WiFi device’ section to connect your Agrowtek Integration Hub via WiFi. Integration Hubs connected via WiFi can only connect to secured 2.4GHz networks and cannot connect to WiFi networks that are not secured with a password and/or 5GHz WiFi networks.
If you have your Agrowtek Integration Hub connected to your network via an Ethernet cable, tap the ‘Get Started’ button underneath the ‘Set up an Ethernet Device’ section. Follow the prompts under their respective section to connect the controller to your network and register the Hub to your account:
12) Once successfully connected, the following success message will display. Tap the ‘Add Equipment to this Controller’ to add Agrowtek equipment to this Hub, Tap the ‘Edit Controller Profile’ button to update the Controller Profile Settings, or tap the ‘Go to Room Dashboard’ button to view the dashboard for the newly connected Agrowtek Integration Hub:
Add New Devices to an Existing Agrowtek Integration Hub
1) To add new equipment to an existing Agrowtek Integration Hub, tap the icon of three lines in the top-left of the Mobile App, then tap the Hardware button in the following menu:
2) In the following page, tap the ‘+Add’ button on the top-right of the hardware page to open the Add hardware Wizard:
3) Select the ‘Integrations’ option on the following page:
4) Select the ‘Agrowtek Integration Hub’ option in the following menu:
5) Select the ‘Add devices to an Existing Hub’ option in the following page:
6) Select the Hub that you wish to add new Agrowtek equipment to:
7) The Agrowtek Integration Hub will now iterate through the list of currently connected devices one module at a time and populate what devices have yet to be registered to the Agrowtek Integration Hub. It is important to connect Agrowtek devices to the Hub one at a time.
Sensor Modules like the SXC will display their sensor readings, and their associated sensor names can be renamed if desired:
Device output modules like the RX4i will have a Device name and device type field per output, which allows the user to rename the output and device type to match the device being controlled by the output:
Lighting Control modules like the LXD will have a ‘Manufacturer’ drop-down list, where the user can specify the make of lights connected to the module:
To skip a specific module from being registered to your Agrowtek Integration Hub, tap the ‘Skip’ button at the bottom of the wizard. Once the sensor or devices have been named to your liking and any required fields for the module have been designated, one can tap the ‘Next Device’ button to move onto the next module detected by the Agrowtek Integration Hub.
8) Once all currently detected modules are registered or skipped, a final confirmation window will populate:
If you wish to add an additional Agrowtek device, connect the module to the Agrowtek Integration Hub while at this screen, connect the Agrowtek device to the Hub, hold down the Setup button on the Agrowtek device to have the Hub re-address the connected Agrowtek device, then tap the ‘Check for new equipment’ button.
Once all Agrowtek equipment has been registered to the Agrowtek Integration Hub, tap the ‘I’ve registered all connected equipment’ button to exit the Add Hardware wizard.