Controller Wifi Setup

In this article, you will learn how to connect any controller to wifi

Device must be in listening mode... to  place the controller into listening mode press and hold the bottom button and wait till  LED flashes blue 

 

  1. Open the app and select the gearwheel on the upper right-hand to corner access Settings

Gearwheel

 

2. from the settings menu select "Connect to Controller 

connecting to a controller

3. now go to your wifi settings on your phone and connect to the wifi network that  matches your SSID for the controller's encloser 

growlink

4. connect to  wifi from the list of wifi networks on your device 

wifi setting

5. once you are connected you will see the screen below, which will confirm you are now connected to your controller.

 

IMG_5009  Press NEXT.

 

6. Select your wifi network from the list of networks

IMG_5010

 

After you've connected your wifi the LEDs on your controller will flash, when it is connected it will breathe green.

 

7. Set up complete

IMG_5011