Growlink Portal - How To Set Up An ESM Aggregate (Tutorial)

18 STEPS

1. In this tutorial, we will show how to create an Environmental Sensor Module Aggregate or Average. This can be a helpful tool to see the average environmental readings in one place on your Dashboard.

2. First, lets click on the Controller we want to set the Aggregate on.

3. For this example, we will select Grow Room.

4. Next, click Modules.

5. Here, you can see the Environmental Sensor Modules we can select to create the Aggregate.

6. Click Add Modules.

7. Next, click Create Aggregate

8. Now click Select on any of the modules listed.

9. Now, let's name the Aggregate. For this example, we will call it Grow Room Average.

10. Check the box located here to enable Offline Alerts for this module.

11. Next, we will select which modules we will be using to create our Aggregate by clicking on the drop down.

12. Since we want an Aggregate of the entire room, we will select all sensors in this room.

13. After selecting the modules we want, you will see a list here of what has been selected.

14. Click Save Changes

15. Now, Click Update Controller.

16. To view our newly created Aggregate, navigate back to the Dashboard.

17. Scroll down to the bottom of your Dashboard to see the newly created Aggregate. After a few minutes, the Aggregate graphs will start to populate with information based on the Environmental readings from the Sensors we selected.

18. You have successfully created a Environmental Sensor Module Aggregate. Nice work.