Mobile App 2.0 -- Dashboard Overview

Audio Transcript:
The dashboard in Mobile App 2.0 is where you review your current sensor data, as well as query historical sensor data. It starts off in the list view, which is similar to how the old version of the mobile app displayed sensor data.

If you wanted to look at a chart for a particular point of sensor data, you'll tap the line of that particular sensor. This populates a chart that you can use the orange slider bar on the bottom to zoom in and to zoom out. You can also hold down your finger on the chart to see the particular points of sensor data for that sensor reading.

Using the center dropdown, you can select a time range to query the device that you're interested in as well as the relevant data points. By tapping the apply filters button, it will query that data and display a chart.

Similarly, you can use the orange slide of bar at the bottom to zoom in and zoom out, and you can hold your finger over the pieces of sensor data to see those values and how they change over time.

You can select and deselect sensor data or device data by tapping the checkbox for an entire series of data or just a specific sensor at the bottom section of the chart.

There are a couple of different views one can use for your sensor data. By tapping the top right, you can also select the grouped view, which groups all sensors of the same type together, which can be useful for comparing multiple sensors, or the individual view where it gives every sensor or device its own chart.

In the center dropdown, you can make a preset, which is a saved set of devices and sensor data. By tapping the top right, you can use the save preset with selection button to make a new preset, and you can change between presets by tapping the funnel icon and selecting your desired preset.

This allows you to swap between different sets of data quickly.