The video below goes over how one can view sensor data from the controller dashboard and journal within the Growlink Mobile App. This video and others can be found at our Growlink University webpage.
Audio Transcript:
Hey, this is Josh with Growlink, and in today's walkthrough we'll be going over how to look at your sensor data within the Growlink Mobile App.
You'll start by logging into the mobile app and selecting one of your controllers, which will take you to its dashboard.
In this example, we have a single PIC with one substrate probe connected to it.
If you tap any of the three readings that it provides, moisture, temp or EC, it will populate you to the sensor readings chart, which has four different charts.
In this example, we're going to tap the substrate moisture chart.
The four charts that display are the real time chart, the last 10 minutes, the last hour, and the last 24 hour readings from this sensor.
If we wanted to look at a longer date range, we'd go back out of these charts and hit the journal tab, select a date range that we wish to look at.
We'll choose the last couple of days here and then we can look at the sensor data from a particular sensor and either it's daytime window or it's night time window.
In this example, we're just like the daytime window here and here.
The chart that populates is just the sensor data from that sensor over the past couple days, averaged over the entire daytime window.
This concludes how you access your controller's sensor data using the Growlink Mobile App.