The video below goes over how to offset environmental sensor readings within the Growlink Mobile App. This video and others can be found at our Growlink University webpage.
Audio Transcript:
Hey, this is Josh with Growlink and in today's walkthrough we going over how to adjust sensor readings in the Growlink mobile app.
You'll start by logging into the mobile app, tapping the settings cog wheel in the top right of the mobile app, followed by tapping Configure Equipment in the Settings menu.
From there, you'll see we have a controller and an example sensor.
In this case, we're going to select the example sensor.
When you select the sensor, the following page will list it's serial number, the name of the sensor, whether it's an aggregate, and then it's going to list all the sensor readings that the sensor is providing.
In this case, what we're going to do is we're just going to change the room humidity to offset those readings.
If you tap room humidity, it'll bring up this menu and you'll see you can adjust the humidity reading by -25% or +25%.
We're going to adjust it down by a couple of percent here, 4%.
And then we're going to hit the save button at the top right of the menu that saves this change.
And then there's one more save button here at the top.
It's not typically necessary to save the change because you've already pushed this offset to the controller, but you can click this if you'd like, which just pushes another config update.
Here you can see the controller is taking a config update, and once it completes, you should be all set.
That concludes how you offset your sensor readings within the Growlink mobile app.