The video below goes over how to create and use a manual task within the Growlink Mobile App. This video and others can be found at our Growlink University webpage.
Audio Transcript:
Hey, this is Josh with Growlink and in today's walkthrough we'll be going over how to use a manual task within the Growlink mobile app.
You'll start by logging in to the Growlink mobile app, going to the dashboard for the controller that you wish to access, and then either tapping the tasks icon up at the top or swiping left and right until you're at the tasks page.
This does require that you already have a manual task set up and active on your controller, which we go over in a separate video.
In the Manual Task tab, you'll see all of your currently active manual tasks.
Here we only have a single manual task that opens up valve #1 on our controller.
You'll see that there's a duration of three minutes.
If I wanted to edit the duration of this task for one activation of this manual task, you can tap the duration of it, and here you can see a wheel populates that lets us specify a custom duration for this manual task.
Here we'll have it activate for one minute and to start the manual task, you will just hit the play button.
If you go to the Devices tab, you'll see that valve #1 is currently in Auto on with a green lightning bolt indicating that this rule is telling this device to turn on.
If we want to stop this device or stop this manual task early, all we need to do is tap the Stop icon in this page.
With this manual task stopped, you'll see that valve #1 is an Auto off again.
This concludes how you use a manual task within the Growlink mobile app.