1. Help Center
  2. Environmental Controls

Quest 24V Remote Control Module

 

The Quest Dehumidifier can be controlled by Growlink using our 24V Remote Module connected to the terminal block on the Quest unit.

24VAC Wiring
The terminal block, circuit breaker and power switch are located on the intake side of the unit.
FLOAT: {External low voltage float switch. Use a normally closed switch. If no float switch is used in the system
FLOAT: leave the jumper connected to the terminal block.}
DEHU: Dehumidificaton (compressor and fan operation). – Blue Wire
R: 24VAC input – Red Wire
FAN: Fan operation only.
C: 24VAC neutral (common) – Yellow Wire

Once you have everything wired correctly, power on the unit.  Add the module using the Growlink app – settings, configure modules, add module

 

QuestDehum